PART: 12190-E - WIDEBELT SANDER - 3 HEADS - 52" WIDE – TIMESAVERS USED - VERY GOOD CONDITION50 HP, 460/60/3, 12" diam. rubber contact drum with hold-down shoes50 HP, 230/460/60/3 platen with hold-down shoes40 HP, 230/460/60/3 platen with hold-down shoes5 HP, 208-230/460/60/3 feed system motor with Poweflex VFDPowered up/down conveyor with digital ProScale readout75" abrasive belt length, electric eye tracking, & motor load meters6 dust outlets 6" diameter9-1/2' x 7-1/2' x 8' approx. ov...

PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIETUSED – GOOD CONDITIONSFully operationallyOver $9,000 in steady rests and tooling Max. capacity  4" dia. x 6" lengthSequence as follows:roughing knifesteady resttraveling roughing knifesecond roughing pattern knifefinishing pattern knifeparting knifeAlso ....if neededend boring bit or formed bitsecond end boring bit or formed knife with side sliding movementLocatelli Dimensions: 10’ 6” Long x 6’ wide x 6’ tall  ...

PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000USED – GOOD CONDITIONMINIMUM LENGHT 16”VARIABLE SPEED 75 - 250 LINEAL FEET/MINMAIN MOTOR 15 HP, 3,600 - 5,000 RPMFEED MOTOR 5 HPMACHINE DIMENSIONS 42” W X 48” L X 46” HMACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” HWEIGHT: 3,000 LBSSEVERAL ROLLERS INFEED & OUTFEEDSEVERAL DIAMETER CUTTERHEADSSEVERAL KNIVE SETS & SETTERS

PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS Spray Line, Dryer, Pumps and Guns and Infeed Table complete USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm =  12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" - 3-1/2"Max. weight: 3 kg per sq. ft Speeds:Mechanical spe...

PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY CHAIN VERY GOOD CONDITION

PART: 12541 - GANG RIP SAW - 50 HP - LOBOUSED - EXCELLENT CONDITIONModel TRS-1014220v/440v, 3ph50 Hp motor2Hp Feed MotorVariable Feed: 30 - 100 FPMArbor length: 11"70mm/2 keyway spindleAdjustable FenceChain in excellent conditionPush button motor controlsLaser

PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS USED - GOOD CONDITIONCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed sidesWorks with Contact Adhesive or PVA's white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI Foot Print: 74" x 28"

PART: 12535 - DOWEL MILLING MACHINE - HAWKERUSED – GOOD CONDITION – AS IS 2” MAXIMUM DIAMETER

PART: 12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED USED Roll-Feed Optimizing and Defecting Cut-Off Saw Precise and Safe Feeding via Eleven Solid Feed Rolls Main Saw Motor: 8.7 HP, 480v, 3ph Pneumatic Blade Cycle 237" Infeed Marking Conveyor Station 19' Outfeed Belt Conveyor with Four Pneumatic Sorting Kickers 10.5" Kvara User-Interface w/ Push-Button Keyboard Blade Diameter: 500mm Variable Speed Feed up to 787 FPM Sound/Safety Hood 480v, ...

PART: 12532 - CROSS FEED SPLICER - KUPER USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min. Operating voltage 480 V, 3 Ph, 60 cycles

PART: 12530 - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE USED - VERY GOOD CONDITIONS Model: T.O.2.4000 Capacity 4000 mm Hydraulic Frontal Control Panel EC9001 Mfg. 2002 CE Norm

PART: 12529 - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI USED - VERY GOOD CONDITIONS Model TRM-2L 3200 Capacity 3200 MM Hydraulic Mfg. 1995 Sharpened knives New mats

PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435AUSED - VERY GOOD CONDITION Year: 2018CAPABILITIES- One-sided edgebander with glue pot- CNC control and command system with TS10 digital controller, large touch screen LCD graphic display, WINDOWS CE operating system, USB port- Chain drive and upper presser - Group of pressure rollersWork stations :- Premilling- Gluing unit with pellet pot - Adjustable pneumatic pressure unit- End cutting unit ...

PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232USEDNumerically controlled machining centre ROVER GOLD 1232Working fields: X = 3.280 mm; Y = 1.260 mm; electrospindle axis Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mmWORKING TABLE                6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum                6 back stops of 115 mm stroke and 26 mm height spacers                6 front stops of 140 mm str...

PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field: X - Axis: 3280mm = 129.1" Y - Axis: 1320mm = 52" Z - Axis: 170mm = 7" 6 = ATS Panel Support Rails Biesse's ATS - auto locating pods Panel Lift Supports for Loading & Unloading of Sheets Multi Zone Working Areas Front, Rear & Side Stops 17.7 HP HSD Electrospindle - HSKF63 12 Position Rotary Tool Changer BH 17L Boring Head w/ quick change system 10 - Vert. Spindles - ...

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE USED - VERY GOOD CONDITIONS Year of Manufacture: 2018 Condition: Excellent Electric: 460 Voltage 60 Cycle 3 Phase GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width; .25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw: Blad...

PART: 12473 - KITCHEN CABINET - COUNTERTOP MANUFACTURING LINE - EVANSUSED - GOOD CONDITIONINDEX TABLEPINCH ROLLERPOSTFORMERCOVING BACKSPLASHPOSTFORMER 0110

PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005

PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532 USED – VERY GOOD CONDITION 2019 Rover A Smart 1532 Machine located in Northern, CA. Available for inspection still under power Pictures are from 12-18-2023 

PART: 12512 – DOWEL MACHINE – HAWKER 2000 USED – GOOD CONDITION – AS IS Complete with knife sharpener Power hopper feeder Various sizes feed rollers Various sizes sleeves Extra sets of blades