ID: 2283
Open
Listing ID: #2283 has been added to your wishlist.
Description
PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232
USED
Numerically controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; electrospindle axis
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6 back stops of 115 mm stroke and 26 mm height spacers
6 front stops of 140 mm stroke
4 side stops of 140 mm stroke 2 RH + 2 LH including the pneumatic system
12 Vacuum modules with dimensions 132 x 146 x H74 mm
6 Vacuum modules with dimensions 132 x 75 x H74 mm
12 CLAMPING UNITS for the locking of narrow pieces
OPERATING GROUP
13.2 kW = 17.7 HP Electrospindle with ISO 30 adaptor and air cooling
Main specifications:
11 kW = 13.6 HP from 12,000 to 15,000 rpm in S1 duty
13.2 kW = 16.1 HP from 12,000 to 15,000 rpm in S6 duty
ceramic bearings
Rh and Lh rotation
rotation speed from 1,000 to 24,000 rpm, programmable by N.C
It includes a dust extraction hood with 6 different positions in Z controlled by the NC, in relation to the length of the tools or the different programs.
The hood is automatically deactivated when the electrospindle is not working.
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
SIERRA CINTA – AUTOMATICA – CAPACIDAD 10”
PARTE: HA250W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity
Round
(Diameter) 1.18"-10"
Rectangle
(W x H) 11.8" x 10"
Work
Load Capacity 3,307 lbs.
Material
Index Stroke 15.75" (Maximum 9 Times Index)
Index
Length 0.394" x 141.7"
Saw
Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade
Speed 89-295 ft./min, 60 Hz, Stepless
Saw
Blade Motor 5 HP
Hydraulic
Pump Motor 1 HP
...
AMXmachine
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor c...