ID: 2283
Open
Description
PART: 12526-E - CNC MACHINING CENTER - ROVER GOLD 1232
USED
Numerically controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; electrospindle axis
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6 back stops of 115 mm stroke and 26 mm height spacers
6 front stops of 140 mm stroke
4 side stops of 140 mm stroke 2 RH + 2 LH including the pneumatic system
12 Vacuum modules with dimensions 132 x 146 x H74 mm
6 Vacuum modules with dimensions 132 x 75 x H74 mm
12 CLAMPING UNITS for the locking of narrow pieces
OPERATING GROUP
13.2 kW = 17.7 HP Electrospindle with ISO 30 adaptor and air cooling
Main specifications:
11 kW = 13.6 HP from 12,000 to 15,000 rpm in S1 duty
13.2 kW = 16.1 HP from 12,000 to 15,000 rpm in S6 duty
ceramic bearings
Rh and Lh rotation
rotation speed from 1,000 to 24,000 rpm, programmable by N.C
It includes a dust extraction hood with 6 different positions in Z controlled by the NC, in relation to the length of the tools or the different programs.
The hood is automatically deactivated when the electrospindle is not working.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
SIERRA CINTA – AUTOMATICA – CAPACIDAD 16.5”
PARTE: 2AA-HA400W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 16.5” - AMADA
NUEVA
CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 1.18"-16.54"
Rectangle
(W x H) 16.3" x 16.3"
Work
Load Capacity 5,511 lbs.
Material
Index Stroke 19.6" (Maximum 9 times index)
Index
Length 0.394" - 177"
Saw
Blade Dimensions (L x T x W) 15' x 0.050" x 1-1/2"
Blade
Speed 56-295 ft./min, 60 Hz, Step less
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2...
AMXmachine
PART: 1AM-2016 – PENDULUM SAW – 5 HP MOTOR, 220V, 3 PHASE – 16” DIAMETER BLADE
PART: 1AM-2016 – PENDULUM SAW – 5 HP MOTOR, 220V, 3 PHASE – 16” DIAMETER BLADEBLADE DIAMETER: 16"MOTOR 5 HP, 220V, 3 PHASE, 3,500 RPMFor a full description on the machine specifications contact
us.
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...