ID: 2442
Open
Description
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
USED - VERY GOOD CONDITION
Main Motor: 10 HP, 230/460v, 3ph
Start/Stop Station for 230v, 3ph
Chip Collect in Two Lower Plastic Bags
Filtration Surface - sq.ft - 331.63
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP, 220V, 2 FASES
PARTE: 1SL-DC-CH30 - TALADRO DE COLUMNA - MOTOR 2 HP,
220V, 2 FASESMOTOR: 2 HP, 110/220V, 60 Hz, 1 FASE12 VELOCIDADES: 180 - 2940 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 255 MMCARRERA CHUCK: 120 MMDISTANCIA DEL CHUCK A LA MESA: 660 MMDISTANCIA DEL CHUCK A LA BASE: 1100 MMDIMENSIONES DE LA MESA: 470 X 415 MMDIMENSIONES TOTALES: 1430 X 670 X 330 MMPESO: 138 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 6"
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
-500x500.jpg)
AMXmachine
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm