ID: 2442
Open
Description
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
USED - VERY GOOD CONDITION
Main Motor: 10 HP, 230/460v, 3ph
Start/Stop Station for 230v, 3ph
Chip Collect in Two Lower Plastic Bags
Filtration Surface - sq.ft - 331.63
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
AFILADORA DE CUCHILLAS
PARTE: 2GB-JC-312 - AFILADORA DE CUCHILLAS PARA MOLDURADORANew with WarrantyWe offer the Jeffer JC-312-GT profile grinder for 1:1 profi le grinding on all your moulding and planing knives. Designed much like the German profile grinders that utilize a template, with additional features at a much more competitive price. We sell this model loaded with all the extra features for no extra charge.The larger capacity is able to sharpen heads up to 12” long x 12” diameter.Standard features inclu...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
NEW WITH WARRANTY
Compact design with best-in-class edgebanding result.
The MX340M Automatic Edgebander is an entry-level edgebander
with the perfect blend of quality and affordability. With fine attention to
detail and quality componentry, the MX340M can output high-quality edges on
cabinet parts and more. This machine is equipped with end trimming, flush
trimming, PVC scraping, and buffing. User-friendly controls and adjustments
allow for...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...