ID: 2444
Open
Description
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504
In Good Running Condition & Ready to Ship
Main motor: 25HP, 220V/440V* (prewired for 220V), 3-phase
Elevation motor: 1/2 HP
Hydraulic pressure: 1000 PSI
Belt Powered Hydraulic Pump - Main Saw Motor - 25HP
Maximum cutting capacity: 10" x 16"
Distance from blade to conveyor table: 1/4"–10"
Feed speed: 0–61 FPM
Saw blade size: 180" L x 1" W
Saw blade speed: 7300 FPM
Floor to table height: 40"
Infeed table: 106" L x 16" W
Infeed belt: 215-3/4" L x 15-1/4" W
Hydraulic Infeed Conveyor Motor
Return table: 107-1/2" L x 18-1/2" W
Return belt: 215-3/4" L x 7-1/4" W
Hydraulic Return Conveyor Motor
Wheel size: 28" dia. x 7/8" W
Dust port size: 2 x 4"
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachine
PART: 12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED
PART:
12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED
USED
Roll-Feed
Optimizing and Defecting Cut-Off Saw
Precise
and Safe Feeding via Eleven Solid Feed Rolls
Main
Saw Motor: 8.7 HP, 480v, 3ph
Pneumatic
Blade Cycle
237"
Infeed Marking Conveyor Station
19'
Outfeed Belt Conveyor with Four Pneumatic Sorting Kickers
10.5"
Kvara User-Interface w/ Push-Button Keyboard
Blade
Diameter: 500mm
Variable
Speed Feed up to 787 FPM
Sound/Safety
Hood
480v,
...
AMXmachine
PART: 12190 - WIDEBELT SANDER - 3 HEADS - 52" WIDE – TIMESAVERS
PART: 12190-E - WIDEBELT SANDER - 3 HEADS -
52" WIDE – TIMESAVERS
USED - VERY GOOD CONDITION50 HP, 460/60/3, 12" diam. rubber contact
drum with hold-down shoes50 HP, 230/460/60/3 platen with hold-down shoes40 HP, 230/460/60/3 platen with hold-down shoes5 HP, 208-230/460/60/3 feed system motor with
Poweflex VFDPowered up/down conveyor with digital ProScale
readout75" abrasive belt length, electric eye
tracking, & motor load meters6 dust outlets 6" diameter9-1/2' x 7-1/2' x 8' approx. ov...
AMXmachine
PART: 12548 - BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT
PART: 12548 -
BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT10 HP MOTOR
USED - GOOD CONDITIONS