Identificador: 2444
Abierta
Descripción
PART: 12561 - HORIZONTAL BAND RESAW - GRIZZLY G0504
In Good Running Condition & Ready to Ship
Main motor: 25HP, 220V/440V* (prewired for 220V), 3-phase
Elevation motor: 1/2 HP
Hydraulic pressure: 1000 PSI
Belt Powered Hydraulic Pump - Main Saw Motor - 25HP
Maximum cutting capacity: 10" x 16"
Distance from blade to conveyor table: 1/4"–10"
Feed speed: 0–61 FPM
Saw blade size: 180" L x 1" W
Saw blade speed: 7300 FPM
Floor to table height: 40"
Infeed table: 106" L x 16" W
Infeed belt: 215-3/4" L x 15-1/4" W
Hydraulic Infeed Conveyor Motor
Return table: 107-1/2" L x 18-1/2" W
Return belt: 215-3/4" L x 7-1/4" W
Hydraulic Return Conveyor Motor
Wheel size: 28" dia. x 7/8" W
Dust port size: 2 x 4"
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
NEW WITH WARRANTY
Compact design with best-in-class edgebanding result.
The MX340M Automatic Edgebander is an entry-level edgebander
with the perfect blend of quality and affordability. With fine attention to
detail and quality componentry, the MX340M can output high-quality edges on
cabinet parts and more. This machine is equipped with end trimming, flush
trimming, PVC scraping, and buffing. User-friendly controls and adjustments
allow for...
AMXmachine
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachine
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH