ID: 2607
Open
Description
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
Used – Good condition
Modelo: 404
Main Motor: 15 HP
Table Size: 65" x 77"
Throat Size: 24-1/4"
Feed Motor: 2 HP
Four-Speed Feed: 62, 93, 124, & 186 FPM
Infeed Rip Fence w/ Two Stop
Maximum Stock Thickness: 4"
Largest Diameter Blade: 14"
Manual Arbor Raise/Lower Via Manual Hand-Crank
Spindle Speed: 3,600 RPM
Current Voltage: 440v, 3ph
Mfg. 1984
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12526 - CNC MACHINING CENTER - ROVER GOLD 1232
PART: 12526-E - CNC MACHINING CENTER - ROVER
GOLD 1232USEDNumerically controlled machining centre ROVER
GOLD 1232Working fields: X = 3.280 mm; Y = 1.260 mm; electrospindle axis
Z Clearance = 180 mm with H=74 mm modules – Z
Stroke = 364 mmWORKING TABLE
6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6 back stops of 115 mm stroke and 26 mm height spacers
6 front stops of 140 mm str...
AMXmachine
PART: 2CK-MX340 – AUTOMATIC EDGEBANDER
PART: 2CK-MX340 – AUTOMATIC EDGEBANDERNEW WITH WARRANTYHigh-quality edge banding results for cabinet parts and case goods.The MX340 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high-frequency motors on both the end trim and top & bottom trim. In addition, it is equipped with PVC radius scraping and buffing units. Its compact design and affordable price point make it the ideal edge banding solu...
AMXmachine
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...