ID: 2602
Open
.jpg)
.jpg)
Description
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical parts only
2 Motors 10 HP, 220/440V, 3 phase - connected to 220V
2 On/Off Switch with magnetic starters
Maximum notcher size 9” long x 2-1/2” height x 1-5/8” depth
Each cutterhead with 4 HSS knives installed
Saw dust removal: 12.25” wide x 10.5” tall each opening in the back side
Saw dust removal: 2,300 CFM recommended, equivalent to a 3 HP dust collector for each opening
Products specifications are subject to change without notice
Video: https://vimeo.com/952661333
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
SIERRA CINTA – CAPACIDAD 28”
PARTE: 2AA-8-MARK-II - SIERRA CINTA
– CAPACIDAD 28” – AMADA
NUEVA CON GARANTIA
SPECIFICATIONS
& FEATURES
Rectangular
Capacity Standard
Capacity M6 High
Column Capacity (Optional)
Blade
at 90° 18” x
22” (457 mm x 560 mm) 18” x
28” (457 mm x 711 mm)
Blade
at 45° ...
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONS
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”, 2-1/2", 3". Angúlo máximo 30°
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...