Identificador: 2607
Abierta
Descripción
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
Used – Good condition
Modelo: 404
Main Motor: 15 HP
Table Size: 65" x 77"
Throat Size: 24-1/4"
Feed Motor: 2 HP
Four-Speed Feed: 62, 93, 124, & 186 FPM
Infeed Rip Fence w/ Two Stop
Maximum Stock Thickness: 4"
Largest Diameter Blade: 14"
Manual Arbor Raise/Lower Via Manual Hand-Crank
Spindle Speed: 3,600 RPM
Current Voltage: 440v, 3ph
Mfg. 1984
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKERNEW BLADESFOR HAWKER DOWEL POLE MILLING MACHINESMODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS - (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNES)
AMXmachine
PART: 4CV-43101-0-E – FRAME SAW – 15 HP
PART: 4CV-43101-0-E – FRAME SAW – 15 HPNEW WITH WARRANTYSaws motor power: 15 HpAdvance speed: 0,3 - 1,7 m/minCutting height: 30 - 200 mmMin. piece length: 300 mmFrame thickness: 1,1 - 3 mmWeight: 2500 kgAdvanced technology, stable and reliableMaximum number of sawing motion is 480 times per minuteSaw blade loss: 0.9, 1.2, 1.4 mmSuitable for heavy bamboo sawing, flooring, shutter, guitar, wall panel and so on.Machine dimensions: 3600 x 880 x 2500mm
AMXmachine
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY -
SOLID WOOD - OGDEN
USED - GOOD CONDITION
Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on
a common shaft - pneumatic cylinders to maximize pressure while relying on
standard plant pressures. Unlike presses without multi-power cylinders, which
require booster compressors, the Model SL36x60 reaches full capacity at 100-psi
plant air pressure.Edge pressure is applied by eight push...
AMXmachine
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFM
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFMNEW WITH WARRANTYBlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"