ID: 2285
Open
Listing ID: #2360 has been added to your wishlist.
Listing ID: #1628 has been added to your wishlist.
Description
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
USED - VERY GOOD CONDITION
Year: 2018
CAPABILITIES
- One-sided edgebander with glue pot
- CNC control and command system with TS10 digital controller, large touch screen LCD graphic display, WINDOWS CE operating system, USB port
- Chain drive and upper presser
- Group of pressure rollers
Work stations :
- Premilling
- Gluing unit with pellet pot
- Adjustable pneumatic pressure unit
- End cutting unit 2 tilting saws 0-15 degrees for bevel cutting, motor 0.50Kw
- Fine trimming top and bottom trimming unit, 0.65Kw motor
- Radius scraper unit for 3mm pvc finishing
- Polishing brush unit, 0.37Kw motor
Specifications:
- Minimum & maximum thickness of the part: 10 to 60mm
- Minimum width of the part: 85mm
- Minimum piece length: 140mm
- Tape thickness in roll: 0.4 to 3mm
- Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
- Variable feed speed: up to 12m/min
- Edgebander length 16 feet and 6 inches
- Automatic start of the groups and motors foreseen in the program.
- 2nd pass direct selection key.
- Management of 8 digital axes
- Lists of programs with manual and/or automatic launch.
- Diagnosis of errors with codes and comments.
- Statistical production data.
- This device is mounted on an adjustable suspended control panel
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
PART: 3AU-DEBU1000 – METAL - BRUSH SANDER – CAPACITY 1000 MM WIDTH
PART: 3AU-DEBU1000 – METAL - BRUSH SANDER – CAPACITY 1000 MM WIDTHNew with warrantyRound Chamfering Machine produces a surface so smooth that a nylon stocking is not snagged. AuDeBu1000 is a deburring machine specializing in round chamfering and capable of simultaneous treatment of large quantities of small-size work and medium-size work up to 1,000mm wide. Round chamfering of product edges has become the standard in sheet-metal processing. As the demand for round chamfering increases, we ca...
AMXmachine
SIERRA CINTA – AUTOMATICA – CAPACIDAD 16.5”
PARTE: 2AA-HA400W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 16.5” - AMADA
NUEVA
CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 1.18"-16.54"
Rectangle
(W x H) 16.3" x 16.3"
Work
Load Capacity 5,511 lbs.
Material
Index Stroke 19.6" (Maximum 9 times index)
Index
Length 0.394" - 177"
Saw
Blade Dimensions (L x T x W) 15' x 0.050" x 1-1/2"
Blade
Speed 56-295 ft./min, 60 Hz, Step less
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2...