Identificador: 2285
Abierta
Descripción
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
USED - VERY GOOD CONDITION
Year: 2018
CAPABILITIES
- One-sided edgebander with glue pot
- CNC control and command system with TS10 digital controller, large touch screen LCD graphic display, WINDOWS CE operating system, USB port
- Chain drive and upper presser
- Group of pressure rollers
Work stations :
- Premilling
- Gluing unit with pellet pot
- Adjustable pneumatic pressure unit
- End cutting unit 2 tilting saws 0-15 degrees for bevel cutting, motor 0.50Kw
- Fine trimming top and bottom trimming unit, 0.65Kw motor
- Radius scraper unit for 3mm pvc finishing
- Polishing brush unit, 0.37Kw motor
Specifications:
- Minimum & maximum thickness of the part: 10 to 60mm
- Minimum width of the part: 85mm
- Minimum piece length: 140mm
- Tape thickness in roll: 0.4 to 3mm
- Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
- Variable feed speed: up to 12m/min
- Edgebander length 16 feet and 6 inches
- Automatic start of the groups and motors foreseen in the program.
- 2nd pass direct selection key.
- Management of 8 digital axes
- Lists of programs with manual and/or automatic launch.
- Diagnosis of errors with codes and comments.
- Statistical production data.
- This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
PARTE:
1TR-14355 - SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
Nueva con
garantíaEquipo convencional y tradicional: proceso simple de soldadura con
electrodo por arco eléctrico (SMAW)Doble voltaje de alimentación: 1 Fase (110 V) | 2 Fases (220 V)Rango de corriente (CA): 1 Fase (100 - 130 A) | 2 Fases (98 - 210 A)Bornes de cambio rápido: 5/16"
Corriente máxima
210 A en CA
Bornes
5/16"
Ciclo de trabajo
...
AMXmachine
PART: 2CK-M412-E - PLANER - 4 SIDES - 5 MOTORS
PART: 2CK-M412-E - PLANER - 4 SIDES - 5 MOTORSNew with warrantyOptions:Top Horizontal Helical CutterheadBottom Horizontal Helical CutterheadSide Vertical Helical CutterheadEconomical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S. With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more. The electronic digit...
AMXmachine
LUMBER - CUT TO SIZE
LUMBER CUT TO SIZE15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”
3,000 -
5,000 foot - 5/8 X 3-1/4 X 70”
Per truck load - every 2 weeksLUMBER FOR PALLETSGREEN OR AIR DRIED
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...