ID: 2285
Open
Description
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
USED - VERY GOOD CONDITION
Year: 2018
CAPABILITIES
- One-sided edgebander with glue pot
- CNC control and command system with TS10 digital controller, large touch screen LCD graphic display, WINDOWS CE operating system, USB port
- Chain drive and upper presser
- Group of pressure rollers
Work stations :
- Premilling
- Gluing unit with pellet pot
- Adjustable pneumatic pressure unit
- End cutting unit 2 tilting saws 0-15 degrees for bevel cutting, motor 0.50Kw
- Fine trimming top and bottom trimming unit, 0.65Kw motor
- Radius scraper unit for 3mm pvc finishing
- Polishing brush unit, 0.37Kw motor
Specifications:
- Minimum & maximum thickness of the part: 10 to 60mm
- Minimum width of the part: 85mm
- Minimum piece length: 140mm
- Tape thickness in roll: 0.4 to 3mm
- Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
- Variable feed speed: up to 12m/min
- Edgebander length 16 feet and 6 inches
- Automatic start of the groups and motors foreseen in the program.
- 2nd pass direct selection key.
- Management of 8 digital axes
- Lists of programs with manual and/or automatic launch.
- Diagnosis of errors with codes and comments.
- Statistical production data.
- This device is mounted on an adjustable suspended control panel
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2MK-PHM.30 - POCKET HOLE MACHINE – PHM.30
PART: 2MK-PHM.30 - POCKET HOLE MACHINE – PHM.30PHM.30 clamps
the stock, routs a pocket and drills a pilot hole with a tap of the foot pedal.
The PHM.30 is
durable and designed for use by professional woodworkers. When you are in
need of premier woodworking machinery, turn to Maksiwa. We pride
ourselves on providing our customers with the absolute best and highest quality
woodworking. Includes free
freight and 2 year warranty.TECHNICAL
INFORMATIONPower: 2,400 Watts – 127 VoltsWeight: ...
-500x500.jpg)
AMXmachine
PART: 2RS-TRIO-CR42-E – ELECTRO MAGNETIC SEPARATOR – HEAVY DUTY – TRIO CR42
PART: 2RS-TRIO-CR42-E – ELECTRO MAGNETIC
SEPARATOR – HEAVY DUTY – TRIO CR42
New with warranty
TRIO Model CR42
Self-Cleaning Electro Magnetic separator
complete as follows
Heavy Duty Steel Frame42" x 48" air cooled magnet with
wound coils and class H insulationDesigned for overhead suspension (4) contact
points5 HP TEFC 1800-RPM Electric MotorClass I Shaft Mount Gear ReducerBelt Drive complete with guard, drive belts,
sheaves and bushings
Self-Cleaning Belt complete ...
AMXmachine
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINA
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel