ID: 2245
Open
Description
PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532
USED – VERY GOOD CONDITION
2019 Rover A Smart 1532
Machine located in Northern, CA.
Available for inspection still under power
Pictures are from 12-18-2023
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 12584 – BORING MACHINE - RITTER R246
PART: 12584 – BORING MACHINE - RITTER R246
USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven
spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM
spindle speed. Row & boring head spacing adjustable from 5" -
24" with mechanical digital readout, pneumatic cylinder drill head
advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth
control.Equipped with: 4 Overhead adjustable pneumatic holddowns on
each head, 72" long...
AMXmachine
DUAL STAGE - ULTRA FINE GRINDING - HAMMER MILL - 100 & 75 HP
PART: 2SB-FGZ-240-40 - DUAL STAGE - ULTRA
FINE GRINDING - HAMMER MILL - 100 & 75 HP
New with warrantyThe compact and efficient Dual Stage Ultra Fine Grinding Wood
Hammer Mills are available in two configurations, both designed to produce the
finest finish grind from a variety of in-feed materials. The FG Series features two 13 Series Finish Grinding Wood
Hammer Mills stacked one above the other. Ideal for processing hogged wood
scrap, planer shavings, sawdust and dry wood chips, the FG S...