ID: 2303
Open
Description
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITION
Model: ACR Superquick 3200
Max. operating width in grain direction
approx. 3200 mm
Min. operating width in grain direction
approx. 600 mm
Width of the veneer strips across the grain from
approx. 60 mm
Veneer thickness
approx. 0.3 – 2.5 mm
Capacity up to 28 joints/min.
Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PART: 12567 - HORIZONTAL BAND RESAW - BAKER
PART: 12567 - HORIZONTAL BAND RESAW - BAKER
Used - Good condition
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
AMXmachine
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANI
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY
CHAIN VERY GOOD CONDITION
AMXmachine
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONS
PARTE: 1SL-DC-PB12 - DOBRADORA DE TUBO HIDRAULICA DE 12 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”. Angúlo máximo 35°