Identificador: 2303
Abierta
Descripción
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITION
Model: ACR Superquick 3200
Max. operating width in grain direction
approx. 3200 mm
Min. operating width in grain direction
approx. 600 mm
Width of the veneer strips across the grain from
approx. 60 mm
Veneer thickness
approx. 0.3 – 2.5 mm
Capacity up to 28 joints/min.
Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”New with warrantySpecifications Engine: 9 HP gasoline Max log diameter: 22" Max board diameter: 20" Max cutting thickness: 4-1/2" Max cutting length：110" Blade speed:(Lenox): 3279FPM Shipping dimensions: 214 length x 64 width x 83 height – Weight 921 Lbs.Video: https://vimeo.com/1042508626
AMXmachine
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE: 2TA-TG-9330 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIAFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grindin...
AMXmachine
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...
AMXmachine
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984