Identificador: 2285
Abierta
Descripción
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
USED - VERY GOOD CONDITION
Year: 2018
CAPABILITIES
- One-sided edgebander with glue pot
- CNC control and command system with TS10 digital controller, large touch screen LCD graphic display, WINDOWS CE operating system, USB port
- Chain drive and upper presser
- Group of pressure rollers
Work stations :
- Premilling
- Gluing unit with pellet pot
- Adjustable pneumatic pressure unit
- End cutting unit 2 tilting saws 0-15 degrees for bevel cutting, motor 0.50Kw
- Fine trimming top and bottom trimming unit, 0.65Kw motor
- Radius scraper unit for 3mm pvc finishing
- Polishing brush unit, 0.37Kw motor
Specifications:
- Minimum & maximum thickness of the part: 10 to 60mm
- Minimum width of the part: 85mm
- Minimum piece length: 140mm
- Tape thickness in roll: 0.4 to 3mm
- Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
- Variable feed speed: up to 12m/min
- Edgebander length 16 feet and 6 inches
- Automatic start of the groups and motors foreseen in the program.
- 2nd pass direct selection key.
- Management of 8 digital axes
- Lists of programs with manual and/or automatic launch.
- Diagnosis of errors with codes and comments.
- Statistical production data.
- This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA
AMXmachine
PART: 12190 - WIDEBELT SANDER - 3 HEADS - 52" WIDE – TIMESAVERS
PART: 12190-E - WIDEBELT SANDER - 3 HEADS -
52" WIDE – TIMESAVERS
USED - VERY GOOD CONDITION50 HP, 460/60/3, 12" diam. rubber contact
drum with hold-down shoes50 HP, 230/460/60/3 platen with hold-down shoes40 HP, 230/460/60/3 platen with hold-down shoes5 HP, 208-230/460/60/3 feed system motor with
Poweflex VFDPowered up/down conveyor with digital ProScale
readout75" abrasive belt length, electric eye
tracking, & motor load meters6 dust outlets 6" diameter9-1/2' x 7-1/2' x 8' approx. ov...
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MM
PARTE: 12109 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 100 LARGO MMUSADOS – COMPLETOS - MUY BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
6,500.00
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...