Identificador: 1860
Abierta
ID de articulo : # 1860 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
Descripción
PART: AMX-10200-E - COUNTERTOP SAW - 5 HP
NEW WITH WARRANTY
SAW BLADE 14”
MOTOR 5 HP, 220V, 3 PHASE
STARTER INCLUDED
MACHINE MEASURES: 1.5 MTS WIDHT X 1.3 MTS LENGTH X 1.1 MTS HEIGHT
TABLE HEIGHT: 27.5” (70 CM)
OPTIONAL:
MOTOR 5 HP, 220V, 1 PHASE
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565 - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface - sq.ft - 331.63
AMXmachine
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO 2GM-BB-412-6HD 4 PIES LARGO x 12 Ga.2GM-BB-612-6HD 6 PIES LARGO x 12 Ga.2GM-BB-812-6HD 8 PIES LARGO x 12 Ga.2GM-BB-1014-6HD 10 PIS LARGO X 14 Ga.Standard Features- ISO 9002 certified- Large 1-9/16” beam opening, adjustable- 1” beam adjustment ( front and back )- Total pieces fingers assortment:- BB-412-6HD: 2”/1pc, 3”/4pcs, 4”/2pcs, 25”/1pc- B...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY -
SOLID WOOD - OGDEN
USED - GOOD CONDITION
Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on
a common shaft - pneumatic cylinders to maximize pressure while relying on
standard plant pressures. Unlike presses without multi-power cylinders, which
require booster compressors, the Model SL36x60 reaches full capacity at 100-psi
plant air pressure.Edge pressure is applied by eight push...