Identificador: 1860
Abierta
.jpg)
.jpg)
.jpg)
Descripción
PART: AMX-10200-E - COUNTERTOP SAW - 5 HP
NEW WITH WARRANTY
SAW BLADE 14”
MOTOR 5 HP, 220V, 3 PHASE
STARTER INCLUDED
MACHINE MEASURES: 1.5 MTS WIDHT X 1.3 MTS LENGTH X 1.1 MTS HEIGHT
TABLE HEIGHT: 27.5” (70 CM)
OPTIONAL:
MOTOR 5 HP, 220V, 1 PHASE
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO
PARTE: 2GM-BB-412-6HD - DOBLADORA MANUAL - USO RUDO 2GM-BB-412-6HD 4 PIES LARGO x 12 Ga.2GM-BB-612-6HD 6 PIES LARGO x 12 Ga.2GM-BB-812-6HD 8 PIES LARGO x 12 Ga.2GM-BB-1014-6HD 10 PIS LARGO X 14 Ga.Standard Features- ISO 9002 certified- Large 1-9/16” beam opening, adjustable- 1” beam adjustment ( front and back )- Total pieces fingers assortment:- BB-412-6HD: 2”/1pc, 3”/4pcs, 4”/2pcs, 25”/1pc- B...
AMXmachine
PART: 2CK-MX370P – AUTOMATIC EDGEBANDER
PART:
2CK-MX370P – AUTOMATIC EDGEBANDERFrom cabinet parts to cabinet doors, this Edgebander can do it all.The Cantek MX370P Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.F...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles