ID: 2599
Open
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
AMXmachine
Description
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
NEW WITH WARRANTY
24" wide cutterhead block, 24" wide x 36" deep inlet hopper.
15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.
Generates solid material into approximately 3/8" x 1" sizes.
A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic material, composites, paper, cardboard or any like materials that will fit into the hopper.
An automatic reverse switch is included to eliminate any jam by heavy solids like steel or metal objects placed into the hopper.
Options:
480 or 600 V
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good conditionMade in USA
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” dia...
AMXmachine
PART: 12505 - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12505-E - VERTICAL PANEL SAW - HOLZHER
1265 SUPER CUT
USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross
cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of
panelsIntegrated dust...