ID: 2599
Open
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
AMXmachine
Description
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
NEW WITH WARRANTY
24" wide cutterhead block, 24" wide x 36" deep inlet hopper.
15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.
Generates solid material into approximately 3/8" x 1" sizes.
A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic material, composites, paper, cardboard or any like materials that will fit into the hopper.
An automatic reverse switch is included to eliminate any jam by heavy solids like steel or metal objects placed into the hopper.
Options:
480 or 600 V
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A
AMXmachine
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFM
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFMNEW WITH WARRANTYBlower HP: 15HP Direct DriveShaker HP: 1/2HP3 phase, 460V26-3/8" 8-Blade ImpellerMachine CFM Rating: 5000Inlet Dust Port Size: 16" RoundOutlet Dust Port Size: 12"x15"Filters: Seventy-Two 5"x60 Clothe BagsBottom Bags: 22"x48"
-500x500.jpg)
AMXmachine
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE
CUTTERHEAD - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical
parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” length x 3” height x 3” depthCutterhead with 40 insert replaceable tip knives cutters for recycled
wood installedOn/Off Switch with magnetic starter
Products specifications are subject to change without notice
AMXmachine
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA - CALIBRADORA DE METAL – 25” ANCHO - 1 LIJA
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA -
CALIBRADORA DE METAL – 25” ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/2”Abrasive
Belt ...