ID: 2579
Open
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
AMXmachine
Description
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
New with warranty
Specifications
Engine: 9 HP gasoline
Max log diameter: 22"
Max board diameter: 20"
Max cutting thickness: 4-1/2"
Max cutting length：110"
Blade speed:(Lenox): 3279FPM
Shipping dimensions: 214 length x 64 width x 83 height – Weight 921 Lbs.
Video: https://vimeo.com/1042508626
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 3EA -TS300K - ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
PARTE: 3EA -TS300K -
ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
Nueva con garantíaFeaturesMax.keyway width per cut :16mmMax. stroke : 300mmNo. of stroke per minute: 8 steps(Low: 22,26, 31, 39spm ; High :44,52,61,78 spm)- Spindle motor : 5HP (4P/8P)- Working table : Dia. 560mm- Inner hole dia. of table : Dia. 75mmStandard Accessories1. Lubrication system2. Rotary table3. Tool box & tools4. Rubber chip cover (4pcs/set)5. Chip box Optional Accessories2. SK-9 Strong 3 Jaw scroll chuck 1PC...
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP
PART:
AMX-10172 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP
MEMORY PROGRAMMABLE
USED
- GOOD CONDITION
LITTLE
USE
MADE
IN ITALY
TABLE SIZE: 13.75”
ANCHO X 26.5” ALTO
TABLE HEIGHT: 37”
MATERIAL THICKNESS:
0.197" MINIMO A 3.15" MAXIMO
MATERIAL WIDTH:
0.39" MINIMO A 3.94" MAXIMO
ELECTRONIC,
PNEUMATIC
ENERGY: 110V, 1 FASE, 60 HZ
ALFA MACHINNE –
MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN
MACHINE DIMENSIONS:
31” W...
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...