ID: 2606
Open
Description
PART: 12610 – STRAIGHT LINE RIP SAW – 1 SAW – NORTHTECH
Used – Good condition
Motor 15 HP, 460/60/3 electrics
Model: SLR-12SC
Mfg. 2017
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12609 – STRAIGHT LINE RIP SAW – 1 SAW – IMC - RP-12U
PART: 12609 – STRAIGHT LINE RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions
AMXmachine
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
LUMBER - CUT TO SIZE
LUMBER CUT TO SIZE15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”
3,000 -
5,000 foot - 5/8 X 3-1/4 X 70”
Per truck load - every 2 weeksLUMBER FOR PALLETSGREEN OR AIR DRIED