ID: 2488
Open
Listing ID: #2488 has been added to your wishlist.
Description
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
Payments & Returns
- Payment Methods
- Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA
AMXmachine
PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB
PART:
2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOBNew with warrantyPaper, corrugated and heavy fiber boardBEST USES - Removal of continuous film, Edge Trim and MatrixINDUSTRIES - Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foilsCAPABILITIESMaterials: Paper, corrugated and heavy fiber boardTrim Width max: 8 1/2" (...
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE:
1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 85 MMDISTANCIA DEL CHUCK A LA MESA: 565 MMDISTANCIA DEL CHUCK A LA BASE: 1050 MMDIMENSIONES DE LA MESA: 285 X 285 MMDIMENSIONES TOTALES: 1140 MM X 500 MM X 300 MMPESO: 80 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 4"