ID: 2579
Open
Listing ID: #2579 has been added to your wishlist.
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
AMXmachine
Description
PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”
New with warranty
Specifications
Engine: 9 HP gasoline
Max log diameter: 22"
Max board diameter: 20"
Max cutting thickness: 4-1/2"
Max cutting length：110"
Blade speed:(Lenox): 3279FPM
Shipping dimensions: 214 length x 64 width x 83 height – Weight 921 Lbs.
Video: https://vimeo.com/1042508626
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
-500x500.jpg)
AMXmachine
SIERRA CINTA PARA METAL - CAP. 7"
PARTE: 1SL-DC-MBS7 – SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP. 7" DIAMETRONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 41,49, 69 METROS POR MINUTOMAXIMO DIAMETRO EN TUBOS: 7"MAXIMO DIAMETRO EN RECTANGULOS: 7" X 12"DIMENSIONES DE LA CINTA: 3/4" X .032 X 93"PESO: 185 KGSEMPAQUE: 1 CAJAMEDIDAS YA INSTALADA: 2.0 MTS LARGO X 1.2 MTS ANCHO X 1.6 MTS ALTOINCLUYE BOMBA PARA REFRIGERANTE
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...