Identificador: 2433
Abierta
PART: 12563 - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES
AMXmachine
Descripción
PART: 12563-E - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES
USED - GOOD CONDITION
MOTOR: 5.5 HP, 220/380V, 60 HZ, 3400 RPM
The Asymmetric Copy Lathe reproduces asymmetric wood components by copying a three-dimensional template. Ideal for copying items such as wooden gun or rifle stocks, Queen Anne style table or chair legs, tool handles, sandals, hangers, sport items musical instruments and so on.
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
PARTE: 2GM-HBR – ROLADORAS HIDRAULICAS - 4 - 8 PIES
Nueva con garantía
2GM-HBR-0425 – ROLADORA
HIDRAULICA – 4’ x ¼”, 3 HP, 220/440V, 3PH
2GM-HBR-05316 – ROLADORA
HIDRAULICA – 5’ x 3/16” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0525 – ROLADORA
HIDRAULICA – 5’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0625 – ROLADORA
HIDRAULICA – 6’ x ¼” , 5-1/2 HP, 220/440V, 3PH
2GM-HBR-0808 – ROLADORA
HIDRAULICA - 8’ x 8Ga , 7-1/2 HP, 220/44OV, 3PH
2GM-HB...
AMXmachine
TRISCADORA 10-60 MM AUTOMATICA
PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]: 0,5 – 1,2 mmBandsaw Width [min-max]: 10 – 60 mmSetting Pitch [min-max]: 5 – 35 mmSetting Speed [d...
-500x500.jpg)
AMXmachine
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE
CUTTERHEAD - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical
parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” length x 3” height x 3” depthCutterhead with 40 insert replaceable tip knives cutters for recycled
wood installedOn/Off Switch with magnetic starter
Products specifications are subject to change without notice
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...