Identificador: 2433
Abierta
PART: 12563 - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES
AMXmachine
Descripción
PART: 12563-E - COPY LATHE - ASYIMMETRIC - GENNARI - 4 HORIZONTAL SPINDLES
USED - GOOD CONDITION
MOTOR: 5.5 HP, 220/380V, 60 HZ, 3400 RPM
The Asymmetric Copy Lathe reproduces asymmetric wood components by copying a three-dimensional template. Ideal for copying items such as wooden gun or rifle stocks, Queen Anne style table or chair legs, tool handles, sandals, hangers, sport items musical instruments and so on.
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
AMXmachine
PARTE: 4VF-CSA - CIZALLA - GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
PARTE: 4VF-CSA - CIZALLA -
GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
Nueva con garantía
150 MM
200 MM
310 MM
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
-500x500.jpg)
AMXmachine
PART: 10395 - COPY LATHE - GENINI MINIAUTOMAT
PART: 10395 - COPY LATHE - GENINI MINIAUTOMATUSED - VERY GOOD OPERATIONAL CONDITIONS - SOLD AS-ISAUTOMATIC FOR SMALL PIECES PRODUCTION5 CUTTING FUNCTIONSMAXIMUM WORKING CAPACITY: UP TO 10 CM DIAMETER & 15 CM LENGTHAUTOMATIC FEEDERHOLDERS FROM 10 MM TO 100 MM, 10 SETS OF HOLDERS APROX.INCLUDED TOOLING WITH SIMILAR VALUE TO THE MACHINE ITSELF, FOR APPROXIMATE 50 DIFFERENT DESIGNSAVERAGE OPERATIONAL SPEED 4 TO 5 PIECES PER MINUTEMOTOR 7.5 HP, 220V, 3 PHASEVIDEOS:https://vimeo.com/428575546https:/...