Identificador: 2599
Abierta
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
AMXmachine
Descripción
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
NEW WITH WARRANTY
24" wide cutterhead block, 24" wide x 36" deep inlet hopper.
15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.
Generates solid material into approximately 3/8" x 1" sizes.
A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic material, composites, paper, cardboard or any like materials that will fit into the hopper.
An automatic reverse switch is included to eliminate any jam by heavy solids like steel or metal objects placed into the hopper.
Options:
480 or 600 V
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachine
PART: 4CV-43101-0-E – FRAME SAW – 15 HP
PART: 4CV-43101-0-E – FRAME SAW – 15 HPNEW WITH WARRANTYSaws motor power: 15 HpAdvance speed: 0,3 - 1,7 m/minCutting height: 30 - 200 mmMin. piece length: 300 mmFrame thickness: 1,1 - 3 mmWeight: 2500 kgAdvanced technology, stable and reliableMaximum number of sawing motion is 480 times per minuteSaw blade loss: 0.9, 1.2, 1.4 mmSuitable for heavy bamboo sawing, flooring, shutter, guitar, wall panel and so on.Machine dimensions: 3600 x 880 x 2500mm
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
DOBLADORA UNIVERSAL - 8 PIES PARA CAL. 16 - EN ACERO INOXIDABLE
PARTE: 1DO-DU-814 - DOBLADORA UNIVERSAL - 8 PIES PARA CAL. 16 - EN ACERO INOXIDABLENUEVA CON GARANTIA
REFORZADA
Longitud de Dobles: 8´ (2.44m)
Capacidad de Dobles: máxima Calibre 16 acero
inoxidable
Apertura de garganta: 3"
Angulo de cortina: 45°
Dados intercambiables (2)12", 10",
8", 6", 5", 4", 3"
Dimensiones de la máquina 2985 x 840 x 1240mm
Peso aproximado: 950 Kg
Fabricada con materiales de primera calidad
Herramienta ideal para hacer dobleces en
lámi...