ID: 2486
Open
Description
PARTE: 2GM-PBR - ROLADORA ELECTRICA - 8-10 PIES
RODILLO
DOBLADOR ENDURECIDO DE 8 – 10 PIES
2GM-PBR-0812E - ROLADORA - 8’x 12 Ga - Movimiento Electrico del Roll, 4hp, 220/440v, 3ph
2GM-PBR-0810E - ROLADORA - 8’x 10 Ga - Movimiento Electrico del Roll, 4hp, 220/440v, 3ph
2GM-PBR-1012E - ROLADORA - 10’x 12 Ga - Movimiento Electrico del Roll, 5.5hp, 220/440v, 3ph
2GM-PBR-1010E - ROLADORA - 10’x 10 Ga - Movimiento Electrico del Roll, 7.5hp, 220/440v, 3ph
Payments & Returns
- Payment Methods
- Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor c...
AMXmachine
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...
AMXmachine
PART: 12526 - CNC MACHINING CENTER - ROVER GOLD 1232
PART: 12526-E - CNC MACHINING CENTER - ROVER
GOLD 1232USEDNumerically controlled machining centre ROVER
GOLD 1232Working fields: X = 3.280 mm; Y = 1.260 mm; electrospindle axis
Z Clearance = 180 mm with H=74 mm modules – Z
Stroke = 364 mmWORKING TABLE
6 ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6 back stops of 115 mm stroke and 26 mm height spacers
6 front stops of 140 mm str...