ID: 2474
Open
Listing ID: #2474 has been added to your wishlist.
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
AMXmachine
Description
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
NEW WITH WARRANTY
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 4CV-43101-0-E – FRAME SAW – 15 HP
PART: 4CV-43101-0-E – FRAME SAW – 15 HPNEW WITH WARRANTYSaws motor power: 15 HpAdvance speed: 0,3 - 1,7 m/minCutting height: 30 - 200 mmMin. piece length: 300 mmFrame thickness: 1,1 - 3 mmWeight: 2500 kgAdvanced technology, stable and reliableMaximum number of sawing motion is 480 times per minuteSaw blade loss: 0.9, 1.2, 1.4 mmSuitable for heavy bamboo sawing, flooring, shutter, guitar, wall panel and so on.Machine dimensions: 3600 x 880 x 2500mm
AMXmachine
PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532
PART: 12524 – MACHINING CENTER – BIESSE ROVER A SMART 1532
USED – VERY GOOD CONDITION
2019 Rover A Smart 1532
Machine located in Northern, CA.
Available for inspection still under power
Pictures are from 12-18-2023
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB
PART:
2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOBNew with warrantyPaper, corrugated and heavy fiber boardBEST USES - Removal of continuous film, Edge Trim and MatrixINDUSTRIES - Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foilsCAPABILITIESMaterials: Paper, corrugated and heavy fiber boardTrim Width max: 8 1/2" (...