ID: 2474
Open
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
AMXmachine
Description
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
NEW WITH WARRANTY
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANI
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY
CHAIN VERY GOOD CONDITION
AMXmachine
SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
PARTE:
1TR-14355 - SOLDADORA - ARCO ELECTRICO - CORRIENTE ALTERNA - 210 A
Nueva con
garantíaEquipo convencional y tradicional: proceso simple de soldadura con
electrodo por arco eléctrico (SMAW)Doble voltaje de alimentación: 1 Fase (110 V) | 2 Fases (220 V)Rango de corriente (CA): 1 Fase (100 - 130 A) | 2 Fases (98 - 210 A)Bornes de cambio rápido: 5/16"
Corriente máxima
210 A en CA
Bornes
5/16"
Ciclo de trabajo
...
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles