Identificador: 2474
Abierta
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
AMXmachine
Descripción
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
NEW WITH WARRANTY
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
-500x500.jpg)
AMXmachine
PART: 1AM-1180-G – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTOR
PART: 1AM-1180-G – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTORNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyGasoline motor 13 HP
Maximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/533846659 - Electric MotorVideo: https://vimeo.com/533846659 - G...
AMXmachine
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIET
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIETUSED – GOOD CONDITIONSFully operationallyOver $9,000 in steady rests and tooling
Max. capacity 4" dia. x 6" lengthSequence as follows:roughing knifesteady resttraveling roughing knifesecond roughing pattern knifefinishing pattern knifeparting knifeAlso ....if neededend boring bit or formed bitsecond end boring bit or formed knife with side sliding
movementLocatelli Dimensions: 10’ 6” Long x 6’ wide
x 6’ tall
...
AMXmachine
FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP
PART:
AMX-10174 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP
MEMORY PROGRAMMABLE
USED
- FAIR CONDITION
MADE
IN ITALY
TABLE SIZE: 11.75”
ANCHO X 22” ALTO
TABLE HEIGHT: 37”
MATERIAL THICKNESS:
0.197" MINIMO A 3.15" MAXIMO
MATERIAL WIDTH:
0.39" MINIMO A 3.94" MAXIMO
ELECTRONIC,
PNEUMATIC
ENERGY: 110V, 1
FASE, 60 HZ
ALFA MACHINNE –
MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN
MACHINE DIMENSIONS:
31” WIDTH X 24” LEN...