ID: 2416
Open
Listing ID: #2416 has been added to your wishlist.
Description
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIET
USED – GOOD CONDITIONS
Fully operationally
Over $9,000 in steady rests and tooling
Max. capacity 4" dia. x 6" length
Sequence as follows:
roughing knife
steady rest
traveling roughing knife
second roughing pattern knife
finishing pattern knife
parting knife
Also ....if needed
end boring bit or formed bit
second end boring bit or formed knife with side sliding movement
Locatelli Dimensions: 10’ 6” Long x 6’ wide x 6’ tall
Weight aproximate: 5,500 lbs.
Automatic Cycle: hopper feeds squares or round blanks into chuck
Station #1...blank is advanced...first trim knife... trims the blank.. to fit thru hollow chuck/steady rest
Station #2...1 roughing knife follows template...to rough to basic shape
Station #3...1 finishing knife makes the first finish cut
Station #4...1 finishing knife - set slightly deeper - makes finish cut
Station #5... and #6... end boring or end shaping - if needed
Station #7... parting tool... mills or cuts off the finished part..finish part drops
Head stock advances to scheduled stop...cycle continues
Production rate..300-450 parts per hour - depending on part to be milled...
All or some of the stations can be used as needed
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MM
PARTE: 12110 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
9,100.00
AMXmachine
AFILADORA DE CUCHILLAS RECTAS
PARTE # 2TA-TG-6000 – AFILADORA DE CUCHILLAS RECTASNueva con garantiaFeatures:Heavy-duty straight knife grinder, rapid for grinding processing and saving time.Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.Automatic grinding table movement forward and backward, label saver.Employed with straight linear motion guides bearing to ensure longitudinal feed trave...
AMXmachine
PART: 1AM-1150 – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY
PART: 1AM-1150 – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depth400 to 800 notcher/hr. approximateCutterhead with HSS knives installed - New designVideo: https://vimeo.com/805816822Machine dimensions: 48” length x 36” width x 40” height - Weight: 662
lb.
Shipping d...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...