Identificador: 2416
Abierta
Descripción
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIET
USED – GOOD CONDITIONS
Fully operationally
Over $9,000 in steady rests and tooling
Max. capacity 4" dia. x 6" length
Sequence as follows:
roughing knife
steady rest
traveling roughing knife
second roughing pattern knife
finishing pattern knife
parting knife
Also ....if needed
end boring bit or formed bit
second end boring bit or formed knife with side sliding movement
Locatelli Dimensions: 10’ 6” Long x 6’ wide x 6’ tall
Weight aproximate: 5,500 lbs.
Automatic Cycle: hopper feeds squares or round blanks into chuck
Station #1...blank is advanced...first trim knife... trims the blank.. to fit thru hollow chuck/steady rest
Station #2...1 roughing knife follows template...to rough to basic shape
Station #3...1 finishing knife makes the first finish cut
Station #4...1 finishing knife - set slightly deeper - makes finish cut
Station #5... and #6... end boring or end shaping - if needed
Station #7... parting tool... mills or cuts off the finished part..finish part drops
Head stock advances to scheduled stop...cycle continues
Production rate..300-450 parts per hour - depending on part to be milled...
All or some of the stations can be used as needed
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
TRISCADORA 10-60 MM AUTOMATICA
PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]: 0,5 – 1,2 mmBandsaw Width [min-max]: 10 – 60 mmSetting Pitch [min-max]: 5 – 35 mmSetting Speed [d...
AMXmachine
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...
AMXmachine
FORMADORA – REDUCE TUBOS – CAPACIDAD – 140 MM
PARTE:
3BE-CH-3001 - FORMADORA – REDUCE TUBOS – CAPACIDAD – 140 MM
NUEVA CON GARANTIA
Process capacity: φ50-φ140mm
Process tube length:500-3500mm
Process tube
thickness:1.5-2.5mm
Process reduction tube
length:20-120mm
Power: Hydraulic 15HP
W/ STANDARD ACCESSORIES AND
TOOL BOX
-500x500.jpg)
AMXmachine
PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD
PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.This product is hand tool only please remember to get the right grit 8" flap wheels for your job.