ID: 2440
Open
Description
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
New - Never used
2022 model, never used
Vertical design
Pneumatic operation
Clamping Capacity 55" L x 96" H x 24" D
Clamping operation is accomplished through four dual pod pressure bars which are activated and can be individually selected for quick accurate clamping up to 120 PSI
Stroke length 3-1/2"
Roller bearing mounted carriage with pneumatic locks
Carriage mounted operators panel
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...
AMXmachine
PARTE: 1SL-DC-BGR700 - AFILADOR DE DISCOS PARA MADERA
PARTE: 1SL-DC-BGR700 - AFILADOR DE DISCOS PARA MADERANUEVO CON GARANTIAMOTOR: 1/3 HP, 110V, 60Hz, 1 FASEVELOCIDAD: 2850 RPMRANGO DE DIAMETRO DE DISCO: DE 80 A 700 MMMOTOR INCLINABLE: IZQ Y DER 20 GRADOSANGULO DE AFILADO: IZQ 30 GRADOS Y DER 45 GRADOSPESO: 45 KGSEMPAQUE: 1 CAJA