ID: 2373
Open
Listing ID: #2373 has been added to your wishlist.
Description
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITION
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions - Approx:
Min. - max. length: 300 mm - 4880 mm = 12" - 16'
Min. - max. width: 25 mm - 1300 mm = 1" - 51”
Min. - max. thickness: 3 mm - 90 mm = 1/8" - 3-1/2"
Max. weight: 3 kg per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection - NOT required for sprayer – if optional dryer is purchased, the heating coil is electric - With paper protective system for belt conveyor.
CONVEYING SYSTEM AND PAPER PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the QUICK-CHANGE system for the guns holder.
Approx sizes:
Mini pluis sprayer is 12'
Dryer is 25'
Infeed table 8'
Approx 45 feet long
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
DOBLADORA UNIVERSAL - 8 PIES PARA CAL. 16 - EN ACERO INOXIDABLE
PARTE: 1DO-DU-814 - DOBLADORA UNIVERSAL - 8 PIES PARA CAL. 16 - EN ACERO INOXIDABLENUEVA CON GARANTIA
REFORZADA
Longitud de Dobles: 8´ (2.44m)
Capacidad de Dobles: máxima Calibre 16 acero
inoxidable
Apertura de garganta: 3"
Angulo de cortina: 45°
Dados intercambiables (2)12", 10",
8", 6", 5", 4", 3"
Dimensiones de la máquina 2985 x 840 x 1240mm
Peso aproximado: 950 Kg
Fabricada con materiales de primera calidad
Herramienta ideal para hacer dobleces en
lámi...
AMXmachine
PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALL
PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALLUsed – Excellent condition - Currently just under 50 hours of useWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide x 12" high cant capacityCurrently just under 50 hours of use
AMXmachine
PART: 12605 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLAN
PART: 12605 – SHREDDER – WOOD – 40 HP – HORIZONTAL – VECOPLANUSED – VERY GOOS CONDITION – ABUT 100 HRS USE ONLYMODEL: VTH 35/8/2 VUMFG. 2018MOTOR 40 HP, 220/460V, 3 PHASECONVEYOR VIBRATORY 16 FEE LONGMACHINE 4 FEET LONGTOTAL LENGHT 20 FEET
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...