ID: 2373
Open
Description
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITION
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions - Approx:
Min. - max. length: 300 mm - 4880 mm = 12" - 16'
Min. - max. width: 25 mm - 1300 mm = 1" - 51”
Min. - max. thickness: 3 mm - 90 mm = 1/8" - 3-1/2"
Max. weight: 3 kg per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection - NOT required for sprayer – if optional dryer is purchased, the heating coil is electric - With paper protective system for belt conveyor.
CONVEYING SYSTEM AND PAPER PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the QUICK-CHANGE system for the guns holder.
Approx sizes:
Mini pluis sprayer is 12'
Dryer is 25'
Infeed table 8'
Approx 45 feet long
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
PART: 1AM-010-G - PALLET DISMANTLER - GASOLINE MOTOR - HEAVY DUTY
PART: 1AM-010-G - PALLET DISMANTLER - GASOLINE MOTOR - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyGasoline motor 13 HP or 15 HPBand saw 228” long x 1-1/4” wideTable dimensions: 60” width x 48” depthMaximum size pallet to dismantle: 60” wide x any lengthPulleys, Tires, Band Saw and Bands – Covered for Operator’s SafetyVideo: https://vimeo.com/797821377Optional: Honda gasoline motorFor more information & specifications contact ...
AMXmachine
PART: 3AU-DEBU1000 – METAL - BRUSH SANDER – CAPACITY 1000 MM WIDTH
PART: 3AU-DEBU1000 – METAL - BRUSH SANDER – CAPACITY 1000 MM WIDTHNew with warrantyRound Chamfering Machine produces a surface so smooth that a nylon stocking is not snagged. AuDeBu1000 is a deburring machine specializing in round chamfering and capable of simultaneous treatment of large quantities of small-size work and medium-size work up to 1,000mm wide. Round chamfering of product edges has become the standard in sheet-metal processing. As the demand for round chamfering increases, we ca...