ID: 381
Open
Listing ID: #381 has been added to your wishlist.
Description
PART: 2TP-010 - PALLET STACKER - FROM 30X30 INCHES TO 50X48 INCHES
New with warranty
Photos & Features:
Standard machine for pallets 30 x 30 inches up to 50 x 48 inches
Machine for pallets of 3, 4 and 5 bars.
Completely pneumatic, no electricity required
Ready to work
Virtually maintenance free machines
Heavy duty construction for maximum production every day
Over 240 machines in operation to date
Patented roller table
Operator doesn’t lift the pallet from the nailer to the stacker, both are at the same height
3000 lb. lift capacity on 100 lb. pressure
Stacks 20, 24, 30 pallets, up to the 3000 lb. lift capacity
1 person operation
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000USED – GOOD CONDITIONMINIMUM LENGHT 16”VARIABLE SPEED 75 - 250 LINEAL FEET/MINMAIN MOTOR 15 HP, 3,600 - 5,000 RPMFEED MOTOR 5 HPMACHINE DIMENSIONS 42” W X 48” L X 46” HMACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” HWEIGHT: 3,000 LBSSEVERAL ROLLERS INFEED & OUTFEEDSEVERAL DIAMETER CUTTERHEADSSEVERAL KNIVE SETS & SETTERS
AMXmachine
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETER
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS:
Diameter
Range: 1/4" ~ 3/4"Motor:
1 HP, 1 PH, 115VWorking
Speed: 24 ~ 28 FPMMinimum
Working Mate...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...