Identificador: 381
Abierta
Descripción
PART: 2TP-010 - PALLET STACKER - FROM 30X30 INCHES TO 50X48 INCHES
New with warranty
Photos & Features:
Standard machine for pallets 30 x 30 inches up to 50 x 48 inches
Machine for pallets of 3, 4 and 5 bars.
Completely pneumatic, no electricity required
Ready to work
Virtually maintenance free machines
Heavy duty construction for maximum production every day
Over 240 machines in operation to date
Patented roller table
Operator doesn’t lift the pallet from the nailer to the stacker, both are at the same height
3000 lb. lift capacity on 100 lb. pressure
Stacks 20, 24, 30 pallets, up to the 3000 lb. lift capacity
1 person operation
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS - BAKER
PART: 12568 - HORIZONTAL BAND RESAW - 2 BANDS -
BAKER
Used - Good condition
460V | 3 Phase | 22’ in length | 2 20HP saw
motors | Extra parts including 5-6 bands