ID: 381
Open
Description
PART: 2TP-010 - PALLET STACKER - FROM 30X30 INCHES TO 50X48 INCHES
New with warranty
Photos & Features:
Standard machine for pallets 30 x 30 inches up to 50 x 48 inches
Machine for pallets of 3, 4 and 5 bars.
Completely pneumatic, no electricity required
Ready to work
Virtually maintenance free machines
Heavy duty construction for maximum production every day
Over 240 machines in operation to date
Patented roller table
Operator doesn’t lift the pallet from the nailer to the stacker, both are at the same height
3000 lb. lift capacity on 100 lb. pressure
Stacks 20, 24, 30 pallets, up to the 3000 lb. lift capacity
1 person operation
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MM
PARTE: 2EB-MR-S380 - AFILADOR PARA SIERRA CINTA DE 16 a 45 MMParameters:Saw blade width: 16-45mmTeeth space: 3-30mmFeed speed: 40-60 teeth/minGrinding wheel: 150mmPower/Speed: 2800 rpmVoltage: 220V/380V, 50HZ/60HZ (Especificar voltage al hacer la orden)Dimension/Weight: 60×50×100cm/102kg
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORA
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORAStandard Features:ISO 9001 certifiedHP Heavy Duty AC main motor, 110VHeavy welded all steel construction for maximum rigidityStandard Pittsburgh AttachmentStandard Round Power Flange Attachment & Right Angle, Double Seam Rolland Drive Cleat Roll , all in one, no installation is required ACME side can be operated at same timeHeavy Duty caster wheels for easy movingOne year warranty for parts Standard Eq...
AMXmachine
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED
OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS
THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width;
.25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap;
servo controlled up to 825 FPM.Saw: Blad...