ID: 2277
Open
Description
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETER
Self-feeding and easily changeable cutters.
Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)
Dowels stock cut with spiral grooves for gluing.
The DM-77 mills wooden dowels from square sticks.
Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.
Specially designed knives make sharpening easy.
SPECIFICATIONS:
Diameter Range: 1/4" ~ 3/4"
Motor: 1 HP, 1 PH, 115V
Working Speed: 24 ~ 28 FPM
Minimum Working Material: Length 8-3/4"
Packing Size: 27" x 19" x 15"
N.W.: 128 LBS
G.W.: 187 LBS
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 12567 - HORIZONTAL BAND RESAW - BAKER
PART: 12567 - HORIZONTAL BAND RESAW - BAKER
Used - Good condition
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
SOLDADORA DE SIERRA CINTAS - 10 – 40 mm
PARTE # 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm