ID: 2247
Open
Description
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
New with Warranty
This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.
• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.
• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.
• It can use flat board without per-cutting.
• Variable speed feeding for fast and easy adjustment.
• Industrial full power motor for maximum cutting capacity.
• Precision sealed long-life bearing.
• Heavy cast iron frame and table for durability usage.
• Designed for high production performance.
• Number of round rods per pass is determined by the diameter to be cut, maximum cutting width is 4" (100 mm).
• Cutting capacity: Ø2- Ø30 mm in diameter.
• Magnetic switch control.
• Easy adjustment in every way, more convenient than competitors on the market that saves your adjustment time.
| SPECIFICATIONS | |
| Max. Working Width | |
| Range of Rod Diameter | 1/8" - 1-1/8" |
| Motor Top Spindle | 7.5 HP |
| Motor Bottom Spindle | 7.5 HP |
| Feed motor | 1 HP |
| Spindle Speed | 6500 RPM |
| Feed Speed | 15 - 45 FPM |
| Max Cutter Diameter | 4" |
| Spindle Diameter | 1-1/4" or 30 MM |
| Dust Hood | 4" x 2 |
| Machine Size & Weight | 70" x 33" x 49" - 2400 LBS |
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor c...
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachine
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINA
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881
-500x500.jpg)
AMXmachine
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...