ID: 434
Open
Description
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
Modelos Disponibles:
HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gauge
HS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gauge
HS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gauge
HS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gauge
HS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gauge
HS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
Payments & Returns
- Payment Methods
- Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"
PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"MOTOR: 4 HP, 220V, 3 FASES, 60 HZVELOCIDAD DISCO: 2,800 RPMTRANSMISION: DOBLE BANDAINCLINACION PRENSA 45 GRADOS (IZQ Y DER)DIAMETRO DEL DISCO: 16" X 1" X 1/8"DIAMETRO FLECHA: 1"PESO: 90 KGSCAPACIDAD DE CORTE:TUBO: 5" DIAMETRO X 1/4 ESPESOR PAREDANGULO: 6" X 4" X 3/8"SOLIDO: 1-1/2" DIAMETRO
AMXmachine
SIERRA CINTA PARA METAL - CAP. 7"
PARTE: 1SL-DC-MBS7 – SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP. 7" DIAMETRONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 41,49, 69 METROS POR MINUTOMAXIMO DIAMETRO EN TUBOS: 7"MAXIMO DIAMETRO EN RECTANGULOS: 7" X 12"DIMENSIONES DE LA CINTA: 3/4" X .032 X 93"PESO: 185 KGSEMPAQUE: 1 CAJAMEDIDAS YA INSTALADA: 2.0 MTS LARGO X 1.2 MTS ANCHO X 1.6 MTS ALTOINCLUYE BOMBA PARA REFRIGERANTE
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...