Identificador: 2440
Abierta
Descripción
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
New - Never used
2022 model, never used
Vertical design
Pneumatic operation
Clamping Capacity 55" L x 96" H x 24" D
Clamping operation is accomplished through four dual pod pressure bars which are activated and can be individually selected for quick accurate clamping up to 120 PSI
Stroke length 3-1/2"
Roller bearing mounted carriage with pneumatic locks
Carriage mounted operators panel
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachine
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V, 1 FASE
PARTE: 1SL-DC-DP5M – TALADRO DE BANCO – MOTOR ½ HP, 110V,
1 FASE110V, 60 Hz, 1 FASE5 VELOCIDADES: 740 - 3140 RPMCHUCK: 1.5 A 13 MMDISTANCIA DEL CHUCK A COLUMNA: 104 MMCARRERA CHUCK: 50 MMDISTANCIA DEL CHUCK A LA MESA: 160 MMDISTANCIA DEL CHUCK A LA BASE: 250 MMDIMENSIONES DE LA MESA: 164 X 164 MMDIMENSIONES TOTALES: 590 MM X 400 MM X 180 MMPESO: 19 KGSEMPAQUE: 1 CAJA
-500x500.jpg)
AMXmachine
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTY
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH
- HEAVY DUTYNew with warranty – 6-month warranty on manufacturing
defects on mechanical parts only2 Motors 10 HP, 220/440V, 3 phase - connected to 220V2 On/Off Switch with magnetic startersMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depthEach cutterhead with 4 HSS knives installedSaw dust removal: 12.25” wide x 10.5” tall each opening in the back sideSaw dust removal: 2,300 CFM recommended, equivalent to a 3 HP d...
AMXmachine
PART: 12609 – STRAIGHT LINE RIP SAW – 1 SAW – IMC - RP-12U
PART: 12609 – STRAIGHT LINE RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions