ID: 2584
Open
Listing ID: #2584 has been added to your wishlist.
.jpg)
Description
PART: 2QW-F15 - MANUAL EDGE SANDER - PNEUMATIC - 8” HEAD
Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.
This product is hand tool only please remember to get the right grit 8" flap wheels for your job.
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PART: 12540 - PINCH ROLLER - CAPACITY 62” - EVANS
PART: 12540 - PINCH ROLLER - CAPACITY 62”
- EVANS
USED - GOOD CONDITIONCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed
sidesWorks with Contact Adhesive or PVA's
white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI
Foot Print:
74" x 28"
AMXmachine
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565 - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface - sq.ft - 331.63
AMXmachine
SIERRA CINTA – CAPACIDAD 28”
PARTE: 2AA-8-MARK-II - SIERRA CINTA
– CAPACIDAD 28” – AMADA
NUEVA CON GARANTIA
SPECIFICATIONS
& FEATURES
Rectangular
Capacity Standard
Capacity M6 High
Column Capacity (Optional)
Blade
at 90° 18” x
22” (457 mm x 560 mm) 18” x
28” (457 mm x 711 mm)
Blade
at 45° ...
AMXmachine
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINE
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINEFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees...