ID: 2419
Open
Listing ID: #2419 has been added to your wishlist.
Description
PART: 12190-E - WIDEBELT SANDER - 3 HEADS - 52" WIDE – TIMESAVERS
USED - VERY GOOD CONDITION
50 HP, 460/60/3, 12" diam. rubber contact drum with hold-down shoes
50 HP, 230/460/60/3 platen with hold-down shoes
40 HP, 230/460/60/3 platen with hold-down shoes
5 HP, 208-230/460/60/3 feed system motor with Poweflex VFD
Powered up/down conveyor with digital ProScale readout
75" abrasive belt length, electric eye tracking, & motor load meters
6 dust outlets 6" diameter
9-1/2' x 7-1/2' x 8' approx. overall dimensions
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE:
1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 85 MMDISTANCIA DEL CHUCK A LA MESA: 565 MMDISTANCIA DEL CHUCK A LA BASE: 1050 MMDIMENSIONES DE LA MESA: 285 X 285 MMDIMENSIONES TOTALES: 1140 MM X 500 MM X 300 MMPESO: 80 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 4"
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
DOBLADORA UNIVERSAL - 6 PIES PARA CAL. 16 - EN ACERO INOXIDABLE
PARTE: 1DO-DU-614 - DOBLADORA UNIVERSAL - 6
PIES PARA CAL. 16 - EN ACERO INOXIDABLENUEVA CON GARANTIA
REFORZADA
Longitud de Dobles: 6´ (1.80m)
Capacidad de Dobles: máxima Calibre 16 acero
inoxidable
Apertura de garganta: 4"
Angulo de cortina: 45°
Dados intercambiables (2)12", 10",
8", (3)6", 5", 4", 3"
Dimensiones de la máquina 2375 x 840 x 1240mm
Peso aproximado: 785 Kg
Fabricada con materiales de primera calidad
Herramienta ideal para hacer dobleces en
l...
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.