PART: 12721 - DUST COLLECTOR - DUST TECHNOLOGY - MOTOR 15 HP USED - GOOD CONDITION MODEL: DT-150 MOTOR 15 HP, 230/460V, 3 PHASE 4 UPPER BAGS 4 LOWER BAGS

PART: 12699 - DOUBLE SHAPER - UNIQUE 250 - WITH FEEDER STEFF 2034 Used - Good condition

PART: 12698 - SANDER - 1 HEAD - 43” WIDE - TIMESAVERS Used - Good condition Motor Main: 20 HP, 208-230/460V, 3 phase, 60 Hz, 1760 RPM Motor feeder: 0.75 HP, 208-230/460V, 3 phase, 60 Hz, 1750 RPM

PART: 12705 - JOINTER - DELTA - DJ-20 Used - Good condition

PART: 12706 - PANEL CLAMP - 12 FEET - JAMES L TAYLOR Used - Good condition 12 FEET LONG 30 clamps

PART: AMX-10008 - DRILL AND SAW - FOR BED RAIL ENDS USED – GOOD CONDITIONS

PART: AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45 Used - Good conditionMade in USA Two (2) 10” blades installedSaws fixed at 45° angle (saw heads are adjustable up to 3°) (2) motors, 1.5 HP, 208-230/460V, 3 phase, currently connected to 220V 3,900 blade RPM Back fence 2 New On/Off Switches with magnetic starters 2 Saw blades installed 10” diameter, Cutting capacity with 10" blades:  2-1/2" width x 3-1/4" height Machine cap...

PART: AMX-10174 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - FAIR CONDITION MADE IN ITALY TABLE SIZE: 11.75” ANCHO X 22” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” WIDTH X 24” LEN...

PART: AMX-10173 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - FAIR CONDITION MADE IN ITALY     TABLE SIZE: 11.75” ANCHO X 22” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” WIDTH X 2...

PART: AMX-10172 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - GOOD CONDITION LITTLE USE MADE IN ITALY TABLE SIZE: 13.75” ANCHO X 26.5” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” W...

PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14 Used - Very good condition 2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM 2 New On/Off Switches with magnetic starters WEG Saw harbor 5/8" Dust exits 2 of 4" diameter, requres aprox. 850 CFM Air use 72 CFM at 65 PSI based in 15 cycles/min Table height 36-1/8" (917 mm) Guide Left: 37” largo Gude Right: 22” largo Pneumatic pedal Each cut takes 4 to 6 seconds Shippi...

PART: 12611 – STRAIGHT LINE  RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984

PART: 12610 – STRAIGHT LINE  RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017

PART: 12609 – STRAIGHT LINE  RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions

PART: 12608 – STRAIGHT LINE  RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...

PART: 12607 – STRAIGHT LINE  RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...

PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVOUSED – VERY GOOD CONDITION – REFURBISHEDMODEL: SP 6PThese machines have been designed for spray lineal parts i.e. Moldings, Flooring, Wood Strips, etc.and can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for di...

PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINAUSED - GOOD CONDITIONCAPACITY: 12 SPRAY GUNS, 2 CIRCUITSHOT AIR TUNNEL, CAN USE HOT WATER FOR HEATINGINFRARED TUNNELUV ED TUNNEL FOR EDGE DRYINGIR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATIONCURRENTLY INSTALLED AND WORKINGVIDEO: https://vimeo.com/1048779881

PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT USED – GOOD CONDITIONS Capacity: 75″ x 169″ Depth of Cut: 2″ Max. Blade Size: 8-5/8″(220mm) Main motor 4 HP 230 volts three phase Depth of cut 2” max Scoring unit with insert knives Saw head rotates 90 degrees for rip or cross cutting Automatic shifting back grid Two gauging bars with flip stop for midway fenceBottom rollers with manual control for easy movement of larger panels Approx....

PART: 12584 – BORING MACHINE - RITTER R246 USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control.Equipped with: 4 Overhead adjustable pneumatic holddowns on each head, 72" long...