ID: 2618
Open
Listing ID: #2618 has been added to your wishlist.
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
AMXmachine
Description
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off Switches with magnetic starters WEG
Saw harbor 5/8"
Dust exits 2 of 4" diameter, requres aprox. 850 CFM
Air use 72 CFM at 65 PSI based in 15 cycles/min
Table height 36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22” largo
Pneumatic pedal
Each cut takes 4 to 6 seconds
Shipping dimensions: 48” length x 40" width x 65” height - Weight: 590 lb. - Freight Class: 85
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
PART: 2CK-MX340M – AUTOMATIC EDGEBANDER
NEW WITH WARRANTY
Compact design with best-in-class edgebanding result.
The MX340M Automatic Edgebander is an entry-level edgebander
with the perfect blend of quality and affordability. With fine attention to
detail and quality componentry, the MX340M can output high-quality edges on
cabinet parts and more. This machine is equipped with end trimming, flush
trimming, PVC scraping, and buffing. User-friendly controls and adjustments
allow for...
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
-500x500.jpg)
AMXmachine
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000USED – GOOD CONDITIONMINIMUM LENGHT 16”VARIABLE SPEED 75 - 250 LINEAL FEET/MINMAIN MOTOR 15 HP, 3,600 - 5,000 RPMFEED MOTOR 5 HPMACHINE DIMENSIONS 42” W X 48” L X 46” HMACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” HWEIGHT: 3,000 LBSSEVERAL ROLLERS INFEED & OUTFEEDSEVERAL DIAMETER CUTTERHEADSSEVERAL KNIVE SETS & SETTERS
AMXmachine
SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKER
NEW BLADES
FOR HAWKER DOWEL POLE MILLING MACHINES
MODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS
(100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNESS)$ 440 USD PER SETFREIGHT INCLUDED IN THE USA, CANADA, MEXICO, BY FEDEX OR UPSWhen ordering in the Cart Summary, Get a quote on Postage with your Zip CodeThen select "Freight inlcuded in the USA b...
440.00$