ID: 2604
Open
Listing ID: #2604 has been added to your wishlist.
Description
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12
Used – Good condition
Manufacturer’s Specification
15 HP Motor + 1 HP feed motor (with Wye Delta soft start)
Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.
Bottom & top kickback fingers
Rack and pinion fence for precise and quick positioning
Digital electronic oiler provides maximum chain and race life
15-1/2″ distance from column to blade
8′ glue line tolerance
Mfg 2000
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...
AMXmachine
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIET
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIETUSED – GOOD CONDITIONSFully operationallyOver $9,000 in steady rests and tooling
Max. capacity 4" dia. x 6" lengthSequence as follows:roughing knifesteady resttraveling roughing knifesecond roughing pattern knifefinishing pattern knifeparting knifeAlso ....if neededend boring bit or formed bitsecond end boring bit or formed knife with side sliding
movementLocatelli Dimensions: 10’ 6” Long x 6’ wide
x 6’ tall
...
AMXmachine
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.