ID: 2604
Open
Description
PART: 12608 – STRAIGHT LINE RIP SAW – 1 SAW - NORTHTECH SRS-12
Used – Good condition
Manufacturer’s Specification
15 HP Motor + 1 HP feed motor (with Wye Delta soft start)
Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.
Bottom & top kickback fingers
Rack and pinion fence for precise and quick positioning
Digital electronic oiler provides maximum chain and race life
15-1/2″ distance from column to blade
8′ glue line tolerance
Mfg 2000
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2QM-R-RCGS-E - ROLLER COATER GLUE SPREADERS - 1, 2 SIDES - 24", 48", 63" WIDE
ROLLER COATER GLUE SPREADERS
PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE
SPREADER - 1 SIDE - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-24-1.75-E - GLUE
SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE
SPREADER - 1 SIDE - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE
SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE
SPREADER - 1 SIDE - 63” WIDE - 1.75” OPEN
PART: 2QM-R...
AMXmachine
SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKER
NEW BLADES
FOR HAWKER DOWEL POLE MILLING MACHINES
MODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS
(100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNESS)$ 440 USD PER SETFREIGHT INCLUDED IN THE USA, CANADA, MEXICO, BY FEDEX OR UPSWhen ordering in the Cart Summary, Get a quote on Postage with your Zip CodeThen select "Freight inlcuded in the USA b...
440.00$
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm